Available Now - Open to Opportunities Worldwide

Mohammed
Aneesuddin

Electronics Engineer | Embedded Hardware | PCB Design | IoT Systems

I design, bring up and validate embedded hardware that works in the real world. From schematic design and PCB layout to power stages and board level fault finding, I build electronics that teams can test, ship and support with confidence.

Global Availability Based in Chennai, India - Open to roles and relocation worldwide - Visa requirements discussed by location
Download Resume View Projects
Mohammed Aneesuddin at Heating Trade Supplies in the United Kingdom
Heating Trade Supplies, UK Electronics Engineer - Diagnostics and Validation
PCB Diagnostics Hardware Validation
68xFPGA speedup vs GPU baseline
30%Remote connectivity improvement
20%System reliability improvement
20+Deployed IoT devices kept online

About

Hardware engineer. Problem solver. Board level thinker.

What I do

Embedded hardware engineer with hands-on experience across schematic design, PCB layout, component selection, board bring-up, hardware validation and production support.

I troubleshoot boards with oscilloscope, logic analyzer and thermal imaging tools, and I work comfortably across analog, digital and power supply design.

Where I work best

  • New board bring-up and fault isolation
  • Power rails, drivers and sensor interfaces
  • STM32, ARM Cortex-M and ESP32 platforms
  • Validation, EMC stress testing and documentation

Profile facts

Location
Chennai, Tamil Nadu, India
Nationality
Indian National
Relocation
Open to relocation worldwide
Languages
English (fluent), Tamil (native)
Mohammed Aneesuddin testing electronic control boards at a lab bench
In the Lab Bench testing and board level fault tracing on live control electronics.
Close view of a green control PCB during bench validation
Inside the Board Close inspection of a control PCB during bench validation.

Technical Skills

Core expertise, clearly grouped.

PCB and Hardware Design

Advanced

Schematic capture and multi-layer PCB layout in Altium Designer and KiCad.

  • DRC / ERC
  • BOM Creation
  • DFM / DFT
  • Component Sourcing
  • Production Hand-off

Embedded Platforms

Proficient

STM32 and ARM Cortex-M development with ESP32-WROOM-32 and RTOS.

  • STM32
  • ARM Cortex-M
  • ESP32
  • RTOS
  • Sensor Interfacing

RF and Connectivity

Proficient

Wireless integration and validation for connected products.

  • Digi XBee3
  • nRF52840 BLE
  • Quectel BG96
  • LTE Cat-M1
  • NB-IoT

Circuit and Power Design

Proficient

Power supply design, power rail analysis and signal integrity.

  • Power Management
  • Analog Design
  • Digital Design
  • Signal Integrity
  • EMC Awareness

Test, Validation and Compliance

Advanced

Board diagnostics and validation backed by clear test evidence.

  • Oscilloscope
  • Logic Analyzer
  • Thermal Imaging
  • Root-Cause Analysis
  • EMC Testing

Programming and EDA Tools

Proficient

Design, simulation and development tools used across my projects.

  • C
  • C++
  • Python
  • VHDL
  • Xilinx Vivado
  • LTspice
  • Proteus
  • Linux

Professional Experience

Experience that ships and supports hardware.

Sep 2025 - Jul 2026United Kingdom

Electronics Engineer - Heating Trade Supplies

Newcastle upon Tyne, United Kingdom

  • Diagnose and repair HVAC and boiler control PCBs across 4 OEMs - Vokera, Siemens LMU/LOA, Honeywell and Baxi.
  • Trace faults in power rails, MOSFET/IGBT drivers and ignition circuits with oscilloscope and thermal imaging.
  • Calibrate 3 sensor feedback types - NTC, pressure and flow - and stress-test boards under thermal and EMC conditions.
  • Lead root-cause analysis on field returns and raise engineering change documentation for PCB revisions.
Aug 2020 - Dec 2020Chennai, India

IoT Design Engineer - Barola Technologies

Chennai, India

  • Designed embedded hardware modules on ESP32-WROOM-32 and STM32 / ARM Cortex-M platforms.
  • Improved remote connectivity by 30% across household appliances.
  • Kept 20+ deployed home devices communicating reliably with Quectel BG96 LTE Cat-M1 / NB-IoT modules.
  • Supported prototype builds and board bring-up across 3 product lines.
2019 - 2020Chennai, India

Embedded Systems Design Engineer - NSIC

National Small Industries Corporation, Chennai, India

  • Completed 100+ hours of training on ARM Cortex-M microcontrollers and RTOS.
  • Developed schematics and PCB layouts for early-stage prototyping and hardware test cycles.
  • Raised embedded solution reliability by 20% after fixing crash causes found in bench testing.
Feb 2023 - Jan 2024United Kingdom

MSc Research Project - University of Surrey

FPGA Hardware Design and Acceleration

  • Built an FPGA accelerator for a Lambert solver used in real-time satellite trajectory planning.
  • First-iteration benchmarking ran 68 times faster than GPU-based solutions.
  • Profiled DSP, LUT and flip-flop use in Xilinx Vivado to size the target FPGA and predict timing closure.

Engineering Projects

Selected projects with measurable results.

68x faster

FPGA Hardware Accelerator

FPGA-based accelerator for a multiple-revolution Lambert solver. Built for real-time satellite trajectory planning.

  • VHDL
  • Xilinx Vivado
  • CORDIC
  • Pipelining

Profiled 3 FPGA resource types and applied 4 optimisation techniques to meet hard real-time timing constraints.

36% smaller

Low-Power Hybrid Full Adder

Hybrid 1-bit full adder in Transmission Gate-Pass Transistor Logic for power-constrained hardware.

  • TG-PTL
  • Microwind
  • 65 nm
  • 90 nm

Cut transistor count from 28 to 18, with 28% lower static power and 20% better noise margin.

Higher PV yield

Automatic Solar Tracker

Embedded solar tracking system with LDR sensors and servo control for better photovoltaic efficiency.

  • LDR Sensors
  • Servo Control
  • Closed-Loop Control

Exhibited publicly to demonstrate sensor interfacing, closed-loop control and embedded automation.

Education

Strong foundations in electronics and systems.

2023 - 2024

MSc in Electronics Engineering, 2:1

University of Surrey, United Kingdom

Digital Design with VHDL, Internet of Things, Nanofabrication and Characterisation, Advanced 5G Wireless Technologies, Computer Vision and Pattern Recognition, AI Programming and Renewable Energies.

2018 - 2022

Bachelor of Engineering, First Class

Electronics and Communication - Chennai Institute of Technology, India

Circuit Simulation and Analysis, Digital Electronics, Microprocessors and Microcontrollers, Digital Communication, VLSI Design, Signals and Systems and Real-Time Operating Systems.

Certifications

  • Project Management: Technical (PMI)
  • FPGA Softcore Processors and IP Acquisition
  • IoT Foundations: Operating System Fundamentals
  • Advanced Diploma in Python Programming (ADPP)
  • McKinsey Forward Program
  • Programming in HTML5 with JavaScript and CSS3

Awards and Leadership

  • First Place, Circuit Debugging, Loyola ICAM 2019
  • Third Place, RAM ROM, Loyola ICAM 2019
  • Runner-Up, SAMHITA 20 National Technical Hackathon
  • Events Secretary for a national symposium with 700+ participants
  • Volunteer computer literacy programmes for 960+ children

Contact

Let us build hardware that works first time.

I am open to Electronics Engineer opportunities worldwide in embedded hardware, PCB design and IoT product teams - wherever great hardware is built.

Email Me Connect on LinkedIn Download Resume

mohammedaneesash@gmail.com +91 63693 66985 Chennai, India